Thursday, November 17, 2011

Expert Tips for Using Stained Glass Grinders

Once you’ve finished cutting your glass pieces, the next step is grinding and smoothing the edges in preparation for foiling and fitting them together. Stained glass grinders make the grinding easier and quicker, but they do present some issues for inexperienced users. These tips from pros can help beginning users of stained glass grinders get a good handle on using their new equipment.

Grind Against the Rotation for Deeper Cuts

On most stained glass grinders, the bit rotates counter-clockwise. If you want to do deeper cuts in the glass, push your glass piece in the opposite direction – that is, from right to left. If you want more control and shallower cuts, push your glass against the bit in the same direction as the turn.

Experiment with Scrap Glass Before You Work with Your Pieces

Every type of glass will grind a little differently. It all depends on the thickness and fragility of the glass, as well as its texture and the shape. Before you start grinding on a new project, get a feel for how the glass grinds by practicing a bit with scraps. That will give you a feel for how much pressure you can use without chipping the edges of the glass.

Always Protect Yourself from Glass Chips and Dust

Eye protection is a must when you’re working with stained glass grinders -– glass chips and glass dust flies everywhere. If your grinder doesn’t have a protective face shield, wear goggles.

Don’t Forget Your Fingers

Glass edges are sharp. Protect your fingertips while you’re grinding with this pro tip for using stained glass grinders. Wrap surgical tape around and over your index fingers and thumbs to protect them from cuts and snags.

Keep the Sponge Wet and the Reservoir Full

It’s important to keep your glass wet while you’re grinding. Keep half an eye on the water level in the water reservoir and make sure that the sponge stays wet.

Troubleshooting Chipped Glass

The biggest issue that most beginners have with glass grinders is chipped edges on their glass. There are a number of reasons this can happen, and the right cure depends on the cause.

Thin or delicate glass can chip if you press too hard against the grinder bit. Try easing back a bit to see if that helps.

A coarse grinding bit can chip more delicate glass as well. Try using a finer grade bit.

A worn bit can also cause chipping, even on heavy-duty glass. Check your bit carefully for worn spots and replace it if necessary.

Finally, the shaft on your grinder may be warped or off center – it’s not typical, but it can happen with an older grinder. If that’s the case, you’ll need to replace the grinder with a new one.

Stained glass grinders will make your work much smoother, more professional and easier. It takes a little effort to get the knack of working with them, but the effort is more than worth the results.

Sunday, November 13, 2011

Stained Glass Grinders and Other Smoothing Tools

Do you really need stained glass grinders to create stained glass art? Some of the most beautiful stained glass mosaics in the world were created before the discovery of electricity, so quite obviously, glass grinders aren’t essential to the art of creating stained glass pieces. On the other hand, stained glass grinders can make your work easier and give you more finished and professional results.

Creating beautiful pieces of stained glass artwork takes a lot of time, planning and sheer, tedious elbow grease. Using the best stained glass tools can help cut down the tedium and increase your enjoyment in your work. If you’re a novice glass worker, your workshop should have a handful of basic tools for cutting, shaping and smoothing glass pieces.

Glass Cutting Tools

The primary tool of the stained glass artist is the glass cutter – a lubricated carbide wheel that scores and cuts through glass. There are many types of glass cutters on the market, including those that are specially designed for people who have hand strength or hand grip problems. You’ll also find specialized glass cutting tools to help you cut clean straight edges and curves.

A glass saw can also be useful for doing intricate work. In general, they’re slower to use than a glass cutter, but may be the perfect solution for thicker glass or for patterns that require inside curves and intricate shapes.

Glass pliers are a necessity for making clean breaks and cuts, and for snipping away small edges or pieces.

Tools for Smoothing Glass

A carborundum stone is a rough stone designed to sand the edges of glass smooth so that the pieces fit together precisely. This precision fit is vital to making stained glass pieces that are as strong as they are beautiful. A carborundum stone costs about $10, which is considerably less expensive than even the cheapest glass grinders, but you’ll be spending hours buffing and smoothing glass edges by hand. Other manual smoothing tools include emery cloths and diamond files.

A glass grinder reduces the amount of work required to smooth the edges of your cut glass pieces. The best glass grinders also provide ways for you to do other things. A grinder that can hold a variety of bits, for example, may allow you to drill holes through glass with a fine bit, or to texture the surface of glass or shape glass beads.

You can buy an inexpensive glass grinder for around $50, but most stained glass artists recommend starting choosing from the intermediate range of stained glass grinders that offer more flexibility and options for expansion.


Friday, October 14, 2011

Useful Facts About Glass Grinders

Glass grinders are used in a number of different industries and businesses and for many different uses. Among the most common business uses for glass grinders is grinding lenses for eyeglasses. Outside of industry, however, glass grinders are most commonly used by stained glass hobbyists to help them grind and smooth glass pieces for their artwork. If you’ve taken classes in a stained glass workshop, chances are that you’re familiar with using glass grinders in your work. If you’re like many people who learn on their own, however, you may be interested in these useful facts about stained glass grinders.

Glass grinders aren’t a necessity for working with stained glass, but using a grinder can make your work easier and more professional. Grinding makes it easier for you to alter the shape of your glass. Because grinders allow you far more precision than glass saws or cutters, you waste less glass due to inaccurate cuts. That ensures that all of your pieces fit together better, which guarantees a more professional finished piece.

In addition, copper foil adheres better to an edge that’s been ground because glass grinders leave a rougher surface for the adhesive to grab and bond with. A grinder makes it possible to grind perfectly angled mitered edges for lamps and 3-D glass pieces. You can use specialty glass bits for drilling holes and adding or removing texture from your glass pieces.

Choosing the Right Glass Grinders

Grinders come in two basic sizes. Large glass grinders have a 12”x11” work surface. Midsize grinders have a 10”x9” work surface. Choose a grinder that will fit comfortably on your workbench or worktable, and that will provide enough space for the types of projects you enjoy creating. A midsize grinder works well if you do lots of precision work with small pieces. If you work with larger pieces of glass, invest in a larger glass grinder.

Torque is the unit of measurement for power. The more torque your grinder has, the more quickly and efficiently it will grind your pieces. If you intend to work with larger diameter grinding heads, invest in a glass grinder that has more torque.

You can buy a basic glass grinder for less than $100, but many hobbyists outgrow basic grinders quickly. You may find that a mid-level grinder is a better investment for your workshop. You may also want to invest in accessories that make your grinder more useful or help you operate it more safely. Accessories for glass grinders include additional work surfaces, face shields and different types of grinding heads and drill bits.

With all the glass grinders available on the market, you’ll have no trouble finding the best one for your needs. Consider how your hobby may expand in the future and choose a machine that doesn’t limit your future choices.





Tuesday, September 6, 2011

Guide to Buying Stained Glass Grinders

Stained glass grinders aren’t essential for most hobbyists, but they can be an invaluable tool if you do more than a few pieces of stained glass artwork a year. Using a glass grinder eliminates the tedium of shaping rough cut glass pieces by hand with a stone, making your hobby less time-consuming and allowing you to concentrate your attention on the more creative aspects of creating stained glass art. When choosing a stained glass grinder, there are a number of factors to consider, including your budget, how much use you’ll get from it and whether you’ll use the grinder for professional or hobby use.

There’s a wide range of glass grinders on the market, from small units that are perfect for a home workshop to fully tricked out grinders that would be at home in an industrial factory grinding lenses for commercial use. In most cases, serious hobbyists choose a mid-range glass grinder that they can grow into rather than a small grinder they’ll outgrow in just a few projects. While smaller stained glass grinders can do most jobs that a hobbyist will want to complete, a larger grinder will have a larger work surface, an eye shield and a larger grinding bit to make work easier.

In addition, stained glass grinders tend to hold their value, so if you choose a smaller unit and decide to trade up, there’s a good chance you can recoup your investment by selling it on the used market and put the money toward a better quality or larger stained glass grinder.

Top Names in Glass Grinders

Consider investing in one of the top names in glass grinders, which include Glastar, Gryphon, Inland and Diamond Max. These well-known manufacturers supply industrial units to factories and professional workshops, and their experience shows in the smaller hobbyist glass grinders they make. Most of them include little perks and extras, such as built-in eye shields and foot rests, larger work surfaces, sponge-free cooling systems and even double bits in different sizes.

Important Specs for Glass Grinders

There are three important specifications to consider when choosing among the many glass grinders on the market.

Torque represents the amount of resistance the bit gives against the glass. If you don’t have enough torque, you’ll find it difficult to do any real shaping with your glass pieces – any real pressure against the bit will slow it down or stop it entirely. Look for a beginner’s machine with a torque range between 21 and 29.

RPM is the number of revolutions per minute for the drill bit. The higher the RPM the smoother and better the ground edge. Your best bet is to look for a machine with RPM listed in the high end of 2,850 and 3,600.

Surface Size is the square footage of work space you have on the glass grinder. If your work surface is too small, you won’t be able to work with larger pieces of stained glass. If it’s really big, you may find that you have to strain. Some higher end glass grinders have a smaller second story work surface that makes it easier to do detail work on smaller pieces.

Wednesday, August 24, 2011

Tips and Tricks for Using Glass Grinders in Hobby Work

If you’re a novice stained glass hobbyist, a glass grinder can help you create beautiful, professional looking projects from the very start. Glass grinders allow you to alter the shape of your glass more easily than glass saws do, and you’ll waste less of that expensive glass due to inaccurate cuts. Because you can grind precisely, the pieces of your project will fit together better, and because glass grinders leave a rougher surface, copper foil will adhere better to the edges. Finally, stained glass grinders with specialty bits simplify tasks like drilling holes, mitering glass edges and removing texture from the glass surface. These tips and tricks can help you get more use out of your stained glass grinder, and ensure that you’re using it safely.

Positioning Hints for Easier Working

Place your glass grinder where you’ll get good overhead light to make it easier to work. Keep in mind, though, that your shadow will fall over your work. Add a second light to shine from the front for the best illumination while you work.

Make sure that the grinder is at a comfortable height for you to work with. If you’ll be standing, you should be able to bend your arms at the elbow and place your hands where you’ll be holding the glass. Positioning the grinding surface higher or lower will put extra strain on your shoulders and lower back.

Put a stool on the floor beside you. Working with one foot elevated can reduce back strain when you work for long periods of time.

Put a splash guard around your stained glass grinder to keep from splattering other surfaces with overspray while you work.

Working Tips for Glass Grinders

Mark pattern lines on the glass with a paint pen. It will help you follow the pattern more easily and the paint is more likely to stay on than other types of markers.

Have a towel handy for drying your pieces before you place them on the pattern to measure them.

Keep your glass piece flat on the grinder’s work surface to prevent angling the edges.

If the glass cuts your fingers while you’re grinding, you may need to reposition or replace the bit. Ease up and check the bit for wear to make sure the bit isn’t too worn to do its job properly.

Keep your water reservoir filled to the right level. If you see a white buildup around the grinding head, it means that there’s not enough water getting to the bit. Check to be sure that the sponge has contact with the bit and that there is enough water or coolant in the reservoir.

Stained glass grinders are a valuable addition to your stained glass supplies and tools. If you use it carefully and treat it properly, you’ll find that it’s invaluable in helping you create professional, beautifully finished pieces of glass art.