Tuesday, September 6, 2011

Guide to Buying Stained Glass Grinders

Stained glass grinders aren’t essential for most hobbyists, but they can be an invaluable tool if you do more than a few pieces of stained glass artwork a year. Using a glass grinder eliminates the tedium of shaping rough cut glass pieces by hand with a stone, making your hobby less time-consuming and allowing you to concentrate your attention on the more creative aspects of creating stained glass art. When choosing a stained glass grinder, there are a number of factors to consider, including your budget, how much use you’ll get from it and whether you’ll use the grinder for professional or hobby use.

There’s a wide range of glass grinders on the market, from small units that are perfect for a home workshop to fully tricked out grinders that would be at home in an industrial factory grinding lenses for commercial use. In most cases, serious hobbyists choose a mid-range glass grinder that they can grow into rather than a small grinder they’ll outgrow in just a few projects. While smaller stained glass grinders can do most jobs that a hobbyist will want to complete, a larger grinder will have a larger work surface, an eye shield and a larger grinding bit to make work easier.

In addition, stained glass grinders tend to hold their value, so if you choose a smaller unit and decide to trade up, there’s a good chance you can recoup your investment by selling it on the used market and put the money toward a better quality or larger stained glass grinder.

Top Names in Glass Grinders

Consider investing in one of the top names in glass grinders, which include Glastar, Gryphon, Inland and Diamond Max. These well-known manufacturers supply industrial units to factories and professional workshops, and their experience shows in the smaller hobbyist glass grinders they make. Most of them include little perks and extras, such as built-in eye shields and foot rests, larger work surfaces, sponge-free cooling systems and even double bits in different sizes.

Important Specs for Glass Grinders

There are three important specifications to consider when choosing among the many glass grinders on the market.

Torque represents the amount of resistance the bit gives against the glass. If you don’t have enough torque, you’ll find it difficult to do any real shaping with your glass pieces – any real pressure against the bit will slow it down or stop it entirely. Look for a beginner’s machine with a torque range between 21 and 29.

RPM is the number of revolutions per minute for the drill bit. The higher the RPM the smoother and better the ground edge. Your best bet is to look for a machine with RPM listed in the high end of 2,850 and 3,600.

Surface Size is the square footage of work space you have on the glass grinder. If your work surface is too small, you won’t be able to work with larger pieces of stained glass. If it’s really big, you may find that you have to strain. Some higher end glass grinders have a smaller second story work surface that makes it easier to do detail work on smaller pieces.

No comments:

Post a Comment